| CHANGES - changes for swtpm |
| |
| version 0.10.0: |
| - swtpm: |
| - Requires libtpms v0.10.0 |
| - Display tpmstate-opt-lock as a new capability |
| - Add support for lock option parameter to tpmstate option |
| - nvstore_linear: Add support for file-backend locking |
| - Remove broken logic to check for neither dir nor file backend |
| - Use ptm_cap_n to build PTM_GET_CAPABILITY response |
| - Define a structure to return PTM_GET_CAPABILITY result |
| - Implement --print-info to run TPMLIB_GetInfo with flags |
| - Support --profile fd=<fd> to read profile from file descriptor |
| - Support --profile file=<filename> to read profile from file |
| - Ignore remove-disabled parameter on non-'custom' profile |
| - Check for good entropy source in chroot environment |
| - Implement a check for HMAC+sha1 for testing future restriction |
| - Implement function to check whether a crypto algorithm is disabled |
| - Print cmdarg-print-profiles as part of capabilities |
| - Check whether SHA1 signature support is disabled in profile |
| - Use TPMLIB_WasManufactured to check whether profile was applied |
| - Determine whether OpenSSL needs to be configured (FIPs, SHA1 signature) |
| - Add support for --print-profiles option |
| - Print profile names as part of capabilities JSON |
| - Display new capability to allow setting a profile |
| - Add support for --profile option to set a profile on TPM 2 |
| - swtpm_setup: |
| - Comment flags for storage primary key and deprecate --create-spk |
| - Implement --print-profiles to display all profile |
| - Add profile entries to swtpm_setup.conf written by swtpm_setup |
| - Add support for --profile-name option |
| - Accept profiles with name starting with 'custom:' |
| - Support default profile from file in swtpm_setup.conf |
| - Support --profile-file-fd to read profile from file descriptor |
| - Support --profile-file <file> to read profile from file |
| - Always log the active profile |
| - Implement --profile-remove-fips-disabled option |
| - Read default profile from swtpm_setup.conf |
| - Print profile names as part of capabilities JSON |
| - Add support for --profile parameter |
| - Get default rsa keysize from setup_setup.conf if not given |
| - swtpm_ioctl: |
| - Use ptm_cap_n for non-CUSE PTM_GET_CAPABILITY response |
| - selinux: |
| - Change write to append for appending to log |
| - Add rule for logging to svirt_image_t labeled files from swtpm_t |
| - tests: |
| - Update IBMTSS2 test suite to v2.4.0 |
| - Test activation of PCR banks when not all are available |
| - Enable SWTPM_TEST_PROFILE for running test_tpm2_ibmtss2 with profile |
| - Add a check for OPENSSL_ENABLE_SHA1_SIGNATURES in log file |
| - Consolidate custom profile test cases and check for StateFormatLevel |
| - Convert test_samples_create_tpmca to run installed |
| - Mention test_tpm2_libtpms_versions_profiles requiring env. variables |
| - allow running ibmtss2 tests against installed version |
| - Derive support for CUSE from SWTPM_EXE help screen |
| - Set OPENSSL_ENABLE_SHA1_SIGNATURES=1 for IBMTSS2 test |
| - Extend test case testing across libtpms versions |
| - Add test case for testing profiles across libtpms versions |
| - Test the --profile option of swtpm_setup and swtpm |
| - teach them to run installed |
| - add installed-runner.sh |
| - install tests on the system |
| - lookup system binaries if INSTALLED is set |
| - build-sys: |
| - enable 64-bit file API on 32-bit systems |
| - Add -Wshadow to the CFLAGS |
| - Require that libtpms v0.10 is available for TPMLIB_SetProfile |
| - debian: |
| - Add rule to allow usage of /var/tmp directory (QEMU) |
| - Add rules for reading profiles from distro and local dirs |
| - Allow non-owner file write access in /var/lib/libvirt/swtpm/ |
| - Add sys_admin capability to apparmor profile |
| |
| version 0.9.0: |
| Note: The SElinux policy for swtpm was completely redone. For systems |
| with an SELinux policy the same policy (>= 40.17) as used in |
| Fedora >= 40 is required due to changes in labels related to libvirt |
| that made the re-development of the SELinux policy necessary. |
| - swtpm: |
| - Use umask() to create/truncated state file rather than fchmod() |
| - Use fchmod to set mode bits provided by user |
| - Replace mkstemp with g_mkstemp_full (Coverity) |
| - fix typo in help message |
| - cuse: Fix Coverity complaints regarding locks |
| - Fix double free in error path |
| - Close fd after main loop |
| - Restore logging to stderr on log open failure |
| - swtpm_setup: |
| - Fail --pcr-banks without --tpm2 |
| - Fail --decryption or --allow-signing without --tpm2 |
| - Initialized @argv in get_swtpm_capabilities() |
| - Flush spk after persisting to create room for another key |
| - Refactor duplicate code into swtpm_tpm2_write_cert_nvram |
| - Move persisting of certificate into tpm2_persist_certificate |
| - Pass key_type to function creating filename for key |
| - Add scheme parameter before curveid to createprimary_ecc |
| - Rename is_ek to preserve for future extension |
| - Mask-out EK and plaform certificate flags and set cert_flags |
| - Move common code into new function read_certificate_file() |
| - Exit with '0' upon --version rather than '1' |
| - Close file descriptors passed to swtpm process on parent side |
| - Make stdout unbuffered |
| - Use medium duration on TSC_PhysicalPresence to avoid timeouts |
| - Add poll() after write() and before read() to detect errors |
| - swtpm_localca: |
| - Add support for up to 20 bytes serial numbers |
| - Introduce --key as more generic alias for --ek |
| - Add missing NULL option to end of array |
| - Make stdout unbuffered |
| - swtpm_cert: |
| - Add support for serial numbers up to 20 bytes long |
| - swtpm_ioctl: |
| - Separate return code from flags |
| - Repeatedly call PTM_GET_INFO for long responses |
| - selinux: |
| - Re-add rule for svirt_tcg_t and user_tmp_t:sock_file (virt-install) |
| - New SELinux policy that requires Fedora 40 or later |
| - tests: |
| - Fixed occurrences of stray '\' before '-' |
| - Rearrange order of test cases to run some also as 'root' |
| - Add tests for command line options and combinations of options |
| - Add softhsm_setup to shellcheck'ed files and fix issues |
| - Add missing 'exit 1' on unexpected file size on --reconfigure |
| - Add test cases for swtpm_cert with max serial number |
| - Fix spelling mistakes |
| - reformat regexs for easier readability and extension |
| - ibmtss2: Add patch to disable x509 test with older libtpms |
| - Upgrade to ibmtss2 v2.0.1 |
| - Fixed several issues detected by shellcheck |
| - build-sys: |
| - Add support for --disable-tests to disable tests |
| - Display GMP_LIBS and GMP_CFLAGS |
| - Only display warning if pkg-config for gmp fails |
| - Add gmp library and devel package as dependency |
| - use PKG_CHECK_MODULES to check libtpms version |
| - rpm: |
| - Add gmp library and devel package as dependency |
| - Split off SELinux files to build an selinux package |
| - debian: |
| - Sync AppArmor profile with what is used by Ubuntu |
| - Add gmp library and devel package as dependency |
| - Allow apparmor access to qemu session bus swtpm files |
| |
| version 0.8.0: |
| - swtpm: |
| - Implement release-lock-outgoing parameter for --migration option |
| - Introduce --migration option and 'incoming' parameter |
| - Implement terminate parameter for ctrl channel loss |
| - Add a chroot option |
| - Introduce disable-auto-shutdown flag for --flags option |
| - If necessary send TPM2_Shutdown() before TPMLIB_Terminate() |
| - Add some more recent syscalls to seccomp profile |
| - Disable OpenSSL FIPS mode to avoid libtpms failures |
| - Avoid locking directory multiple times |
| - Remove support for pre-v0.1 state files without header |
| - Use uint64_t in tlv_data_append() to avoid integer overflows |
| - Use uint64_t to avoid integer wrap-around when adding a uint32_t |
| - Do not chdir(/) when using --daemon |
| - Check header size indicator against expected size (CVE-2022-23645) |
| - Fixes for gcc 12.2.1 -fanalyzer |
| - build-sys: |
| - Fix configure script to support _FORTIFY_SOURCE=3 |
| - Define __USE_LINUX_IOCTL_DEFS in header file (Cygwin) |
| - swtpm-localca: |
| - Re-implement variable resolution for swtpm-localca.conf |
| - Test for available issuercert before creating CA |
| - swtpm_setup: |
| - Configure swtpm to log to stdout/err if needed (glib >=2.74) |
| - tests: |
| - Use ${WORKDIR} in config files to test env. var replacement |
| - Patch IBM TSS2 test suite for OpenSSL 3.x |
| - build-sys: |
| - Add probing for -fstack-protector |
| |
| version 0.7.0: |
| - swtpm: |
| - Support for linear file storage backend (file://) |
| - Report 'tpm-1.2' & 'tpm-2.0' in --print-capabilities depending what |
| libtpms supports |
| - Add implementation of SWTPM_HMAC using OpenSSL 3.0 APIs |
| - Wipe keys from stack and heap |
| - Many other small changes |
| - Make --daemon not racy |
| - swtpm_setup: |
| - Only activate SHA256 PCR bank, not SHA1 bank anymore by default |
| - Support for linear file storage backend (file://) |
| - Implement option --create-config-files to create config files |
| - Use non-deprecated APIs to contruct RSA key (OSSL 3) |
| - Report stderr as returned by external tool (swtpm-localcal) |
| - Replace '+' and ',' characters in VMId's to make work with |
| common name in X509 subject |
| - Add support for --reconfigure flag to change active PCR banks |
| - swtpm_localca: |
| - Created certificates for CAs and TPM that do not expire |
| - swtpm_cert: |
| - Allow passing -1 for days to get a non-expiring certificate |
| - test: |
| - ASAN-related test changes and skipping of tests if ASAN is used |
| - Fix tests using tpm2-abrmd by preventing concurrency |
| - Skip chardev related tests after checking for chardev support |
| - exit with error code if mktemp fails |
| - OSSL 3: Make TPM 1.2 test compile; skip IBM TSS 2 test |
| - build-sys: |
| - Introduce --enable-sanitizers to configure |
| - Remove check for pip3 that was used by python swtpm_setup |
| - Allow passing of aditional CFLAGS during build |
| |
| version 0.6.0: |
| - swtpm: |
| - Fix --print-capabilities for 'swtpm chardev' |
| - Various cleanups and fixes (coverity) |
| - Addressed potential symlink attack issue (CVE-2020-28407) |
| - swtpm_setup: |
| - Rewritten in 'C'; needs json-glib |
| - Addressed potential symlink attack issue (CVE-2020-28407) |
| - swtpm_ioctl: |
| - Use timeouts for communicating with swtpm (Unix socket) |
| - swtpm-localca: |
| - Rewritten in 'C' |
| - tests: |
| - Use the IBM TSS2 v1.6.0's test suite |
| - Store and also restore the volatile state at every step when running |
| IBM TSS2 test suite |
| - Various cleanup |
| - build-sys: |
| - Add HARDENING_CFLAGS and _LDFLAGS to all C programs |
| |
| version 0.5.0: |
| - swtpm: |
| - Write files atomically using a temp file and then renaming |
| - swtpm_setup: |
| - Removed remaining 'c' wrapper program |
| - Do not truncate logfile when testing write-access (regression) |
| - Remove TPM state file in case error occurred |
| - swtpm-localca: |
| - Rewrite in python |
| - Allow passing pkcs11 PIN using signingkey_password |
| - Allow passing environment variables needed for pkcs11 modules using |
| swtpm-localca.conf and format 'env:VARNAME=VALUE'. |
| - build-sys: |
| - Add python-install and python-uninstall targets |
| - Add configure option to disable installation of Python module |
| - Use -Wl,-z,relro and -Wl,-z,now only when linking (clang) |
| - Use AC_LINK_IFELSE to check whether support for hardening flags |
| |
| version 0.4.0: |
| - swtpm: |
| - Invoke print capabilities after choosing TPM version |
| - Add some recent syscalls to seccomp blacklist |
| - swtpm_cert: |
| - Support --ecc-curveid option to pass curve id |
| - swtpm_setup & related scripts: |
| - Rewrite swtpm_setup.sh in python with TPM 1.2 not requiring tcsd |
| and TPM tools anymore; new dependencies: |
| - python3: pip, cryptography, setuptools |
| dropped dependencies for swtpm_setup: |
| - tcsd, expect, tpm-tools (some still needed for pkcs11 tests) |
| - Added support for RSA 3072 keys (for libtpms-0.8.0) and moved to |
| ECC NIST P384 curve; default RSA key size is still 2048 |
| - Added support for --rsa-keysize option |
| - Extend script to create a CA using a TPM 2 for signing |
| - tests: |
| - Use the IBM TSS2 v1.5.0's test suite |
| - Add test case for loading of an NVRAM completely full with keys |
| - Have softhsm_setup use temporary directory for softhsm config & state |
| - various other improvements |
| - man pages: |
| - Improvements |
| - build-sys: |
| - clang: properly test for linker flag 'now' and 'relro' |
| - Gentoo: explicitly link libswtpm_libtpms with -lcrypto |
| - Ownership of /var/lib/swtpm-localca is now tss:root and |
| mode flags 0750. |
| |
| version 0.3.0: |
| - swtpm: |
| - Support for applying 'TPM Startup' command during initialization |
| - Use writev_full rather than writev; fixes --vtpm-proxy EIO error |
| - Only accept() new client ctrl connection if we have none (bugfix) |
| - swtpm_setup & related scripts: |
| - Support whitespaces in filenames and paths |
| - Do not fail on future PCR banks' hashes |
| - swtpm_cert: |
| - Fix OIDs for TPM 2 platforms data |
| - Option parsing cleanup |
| - Support for passing password in various forms |
| - Use gnutls_x509_crt_get_subject_key_id API call for subj keyId |
| - Support 64bit serial numbers read from command line |
| - swtpm_ioctl: |
| - Block SIGPIPE so we can get EPIPE on write() |
| - swtpm_bios: |
| - Block SIGPIPE so we can get EPIPE on write() |
| - tests: |
| - Increased timeouts and better support for running tests with |
| executables run by valgrind |
| - Allow running tests with choice of seccomp profile option |
| (SWTPM_TEST_SECCOMP_OPT) to enable building for Ubuntu |
| - Various cleanups & fixes |
| - SELinux: |
| - More rules added for support on F30 |
| |
| version 0.2.0: |
| - Linux: swtpm now runs with a seccomp profile (blacklist) if compiled with |
| libseccomp support |
| - Added subpport for passing key and passphrase via file descriptor |
| - TPM 2 commands can now be prefixed by 'the TCG header' and responses will |
| have a 4-byte prefix and 4-byte suffix. |
| - Added --print-capabilities command line option |
| - Proper handling on EINTR on read, poll, and write |
| |
| version 0.1.0: |
| first public release |
